Home > POWER TOOLS & ACC > POWER TOOLS > BENCH & STATIONARY > POWER MITRE BOXES
Sort By:
1
SAW MITER COMPOUND 10IN MITERSAW COMPOUND 10IN W/LASER SAW COMPOUND MITER 10 INCH
SAW MITER COMPOUND 10IN
Our Price: $150.82
Large table for better material support with vice clamping system to secure work space. Thumb actuated positive stops for quick miter adjustments. Dust collector attachment minimizes airborne particles. Specs: 5,000 rpm, 0-52 degree miter angle to the left and right for increased flexibility, 0-45 degree bevel angle to the left to provide clean and accurate bevel cuts. Includes: 24T TCT saw blade, dust bag, vise assembly, 5mm hex bar wrench, and holder. Make precision miter cuts up to 45 degrees left and right with 9 stops at commonly used angles. Make bevel cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in seconds. Spindle lock for quick blade changes. Includes: 60T Carbide-Tipped blade installed, hold-down clamp, dust bag, two extension wings, blade wrench and two AAA batteries for laser. No load speed: 4600 rpm. Weighs 24 lbs. 10" Compound miter saw with 14 amp motor, 5,200 rpm. Maximum cut capacity at 90? degree miter - 4"x4" and 2"x6" dressed lumber. Maximum cut capacity at 45? miter - 2"x4" and 1"x6" dressed lumber. Maximum cut capacity at 45? bevel - 2"x4". Miters 45 to 90 degrees; bevels 0-45 degrees. Lightweight die cast aluminum base allows for weight of 36.6 lbs. Accepts SS9100 (087.7894) leg stand and material supports. Includes dust bag, work clamp, 40th carbide tipped blade and blade wrench.
Hitachi C10FCH2 Sliding Compound Corded Miter Saw with Laser Marker MITERSAW SLIDING COMPOUND 10IN Dewalt DW713 Single Bevel Compound Corded Miter Saw
Laser marker system for increased cutting accuracy. Horizontal handle, Large table, large extended fence raises to 4" for cutting crown molding vertically. Thumb actuated positive stops for quick miter adjustments. Carbon brush access, allows user to replace brush as needed  Dust collector attachment, to minimize airborne particles. Max work piece capacity is 2-5/16" H, max. by 5-21/32" W. Specs: Single-phase 120VAC 60Hz motor, 0-52 degree miter angle range to the right and left, 0-48 degree bevel angle range to the left with adjustable bevel stops. Includes: 10" tct saw blade, vice assembly with knob bolt, 10mm box wrench, 4mm hex bar wrench. Sliding rail system for crosscutting stock up to 12" wide. Make precision miter cut up to 45 degrees left and right. Make bevel cuts up to 45 degrees left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in seconds. Spindle lock for quick blade changes. Includes: 60T Carbide-tipped blade, hold-down clamp, dust bag, two extension wings, rear support foot bar, blade wrench and two AAA batteries for laser. 4800 rpm. Weighs 40 lbs. Two-piece aluminum and Lexan guard design protects against side impact. Lexan allows user to see the blade without the glare, providing a clean line of sight. Base handle design delivers increased comfort and portability to the end user. Positive bevel stops, cam lock miter handle, adjustable stainless detent plate and precise miter system. SPECIFICATIONS: 13 amp motor, 5,000 RPM, negative 3-degree to 48-degree bevel capacity, left and right miter capacity, machined base fence support, tall sliding fence and easy access bevel lock.
Makita LS1040 Double Bevel Compound Corded Miter Saw Dewalt DW715 Single Bevel Compound Corded Miter Saw Hitachi C12FDH Dual Compound Miter Saw
Machined aluminum base ensures accurate cuts. Performs compound cutting operations. Dual post compound pivoting arm. Bevel cuts up to 45 degrees to the left. Miter cuts 0-45 degrees left and 0-52 degrees right. Specs: Blade diameters 10", arbor 5/8", max. cutting capacity (bevel/miter) 90 degree/90 degree 2-3/4" x 5-1/8", 45 degree/45 degree 1-3/8" x 3-5/8", no load rpm 4,600, length 18-23/32", weight (lbs.) 24.2. Includes: socket wrench, carbide tipped blade, dust bag and triangular rule. Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree to the left and 0-3 degree to the right for increased capacity. 0-50 degree left and right miter capacity for greater versatility. Cam lock miter handle with miter detent override deliver quick, accurate miter angles. 4-hardened steel bevel stops at 0, 33.9, 45 and 48 degrees. Lightweight with built-in carry handle for easy portability. STANDARD EQUIPMENT: Carbide blade, extension kit, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 4,000 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 5-1/4" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat, 6-1/2" horizontal capacity crown molding lying flat, 2 x 8" for 45 degree bevel cut capacity (dimensional lumber), 2 x 8" for 90 degree cross-cut capacity (dimensional lumber), 2 x 8" max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6 dimensional lumber max width for 45 degree miter cut capacity, 42 lbs. tool weight. Stand Not Included. Laser marker system accurately indicates where the blade will cut on the material and can be easily adjusted to the right or the left of the cut mark depending upon the user preference. Powerful 15 amp motor with 1,950 watts of output power smoothly powers through hardwoods with ease. Elastomer compound coats the horizontal handle, reducing vibration, while adding comfort and preventing slippage. Tall, pivoting aluminum fence that stands at a height of 5-1/8" allows crown molding to be cut vertically for convenience. Large base provides better support and balance to prevent material from warping. Externally accessible carbon brushes allow for quick and easy maintenance to prolong tool life. Miter scale ranges from 0-52 degrees, both to the right and left, for a broader range of cuts. Miter angles can be quickly adjusted using Hitachi's thumb actuated positive stops. Bevel scale ranges from 0-48 degrees to the right and left allowing the material to stay in place while the saw head flips to make opposing cuts. After major bevel angle is secured, micro-bevel adjustment knob can be used to dial-in to a precise angle without the weight of the saw head compromising the accuracy. Weighs 46.3 lbs.
Dewalt DW716 Double Bevel Compound Corded Miter Saw SAW MITER W/BATT W/CHARGER 20V SAW MITER SLIDE COMPOUND 10IN
Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree with positive stops at 0, 33.9, 45 and 48 degree both left and right allowing user to flip the saw not the material. Back fence design delivers ability to cut 2 x 10" dimensional lumber at 90 degrees and 2 x 8" at 45 degrees. Precise miter system and machined base fence support, innovative gearbox and belt-drive design for increased cutting capacity. Lightweight, head lock-down pine and built-in carrying handle. Cam lock miter handle with detent override. Designed for use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path. STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 3,600 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat (10" with back fence), 6-1/2" horizontal capacity crown molding lying flat,  2 x 8" (2 x 10" with back fence) left and right for 45 degree bevel cut capacity (dimensional lumber),  2 x 8" (2 x 10" with back fence) for 90 degree cross-cut capacity (dimensional lumber),  2 x 8" (2 x 10" with back fence) max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6" (2 x 8" with back fence)  dimensional lumber max width for 45 degree miter cut capacity. 44 lbs. tool weight. Stand Not Included. Utilizes 20 volt Max Battery pack which provides on average, 183 cuts of 2x4 pine or 275 cuts of 3-1/4 pine baseboard. Integrated XPS cross system provides adjustment free cut line indication for better accuracy and visibility. Capacity to cut up to 3-5/8" nested crown and 3-1/2 base vertically. Will cut 2x8 lying flat. Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy. Oversized bevel scale makes bevel angle adjustments accurate and easy. Compact, lightweight design (31.6 lbs) allows for easy transport and storage. Cam lock miter handle delivers quick and accurate miter angles. Precise miter system and machined base fence support optimized durability and cutting accuracy. 7-1/4" blade diameter. No load speed: 3750 rpm. Includes battery, charger, carbide blade, user's guide, blade wrench and material clamp. 15 AMP motor tackles tough cutting jobs with ease. Zero rear clearance slide system. Ergonomic upfront bevel lock for quick and easy adjustments of bevel angles. Tool-less, adjustable laser marker for cutting accuracy. Positive stops with miter detent override for faster transitions between miter angles. Equipped with LED light for added visibility. 0-60 degree miter angle to the right and 0-55 degree miter angle to the left, 0-48 degree bevel angle range to the right and left. STANDARD EQUIPMENT: saw, 10" TCT saw blade, dust bag, 13 mm wrench, and vice assembly. SPECIFICATIONS: 15 AMP belt driven motor, pivoting fence, no-load speed of 3,200 RPM.
Makita LS1018 Dual Slide Compound Miter Saw SAW MITER SLIDING COMPND 7-1/4 SAW MITRE DUAL BEVEL 12IN 120V
Large cutting capacity in a compact design and less weight at only 43.7 lbs. for job site portability. Powerful 13.0 amp direct drive motor requires less maintenance and delivers 4,300 rpm. Cuts up to 12" at 90 degrees and 8-1/2" at 45 degrees. Linear ball bearing system engineered to deliver "dead-on" accurate cuts. Rear handle bevel lock is easily accessible and adjusts 0-45 degrees (left and right) with positive stops at 0 degrees, 45 degrees (left and right).  Soft start feature for smooth start-ups. Ergonomic rubberized D-handle design for better fit and added comfort. Large precision machined aluminum base supports material for more efficient cutting. Electric brake for maximum productivity. See-thru blade guard system for greater visibility of blade and line of cut. Oversized trigger switch for better fit, added comfort and easier operation. Includes extension wings for supporting long work pieces. Ideal for baseboard and crown molding installation, finish carpenters, cabinet and furniture makers, wood floor installers, deck builders, general contractors and more. Includes: (1) 10" 40T Miter saw blade, (1) triangle rule for miter saws, (1) vice assembly, (1) dust bag assembly, (1) extension wing and (1) wrench 13mm. The DHS716 12" (305mm) 120 volt Max Compound Miter Saw with top handle delivers power and cutting capacity with the portability and convenience of a cordless tool. Flexible power for corded or cordless use. CutLine Blade positioning system delivers adjustment free cutline indicator. Includes the 12" Compound Miter Saw, blade, blade changing wrench, dust bag and a  120 volt AC adapter (Batteries And Dual Port Fast Charger Sold Separately). 45 degree bevel cut capacity; 45 degree miter cut capacity; 90 degree cross-cut capacity. Arbor size: 5/8" (1") IN. Weighs only 44 lbs.
SLD SAW MITER SLDING CMPND 12" SAW MITER SLIDING COMPND 7-1/4 SAW MITER SLDG CMPD W/LSR 10IN
Features adjustable laser line for accurate and easy cutting. Zero clearance slide structure keeps width of tool 890 mm at any stroke of saw head. Thumb actuated positive miter stops for quick and easy adjustment. Soft grip handle reducing vibration to end user. Sliding sub fences on right and left for support of large stock. Equipped with blade guard for increased user safety. 0-45 degree bevel angle range to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place. Light in weight for easy transportation and maneuverability. High performance dust collection. Compact slide system allows the saw head to slide along fixed rails, eliminating the need for rear clearance. Large cutting capacity in a compact design with less weight at only 57.9 lbs. Powerful 15.0 amp direct drive motor requires less maintenance and delivers 3,200 rpm. Large-sized aluminum base improves stability of material for efficient cutting. Unique 2-steel rail sliding system offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (5-1/4?), crown molding (6-5/8? nested), and crosscut a 4" x12" at 90 degrees. The saw miters 0 to 60 degrees left and right, with positive stops at 0, 15, 22.5, 31.6, 45 and 60 degrees (left or right). The bevel lock allows for easy access and quick adjustments from 0 to 48 degrees (left and right). Includes: (1) 10" x 5/8?60T Micro-polished Miter saw blade, (1) triangle rule, (1) vertical vice, (1) dust bag, (1) Hex wrench.
SAW MITER DUAL-BEVEL GLDE 10IN MITER SAW KIT 10IN M18 9.0BATT Dewalt DWS780 Double Bevel Sliding Compound Corded Miter Saw
Articulated hinge arms reduce the saw's front-to-back footprint by up to 10-in. compared to slide saws with similar capacities. Axial-Glide system offers more durable precision than side saw rail systems. Powerful 15 amp motor delivers 4,800 no-load rpm for professional cutting capacity. Wide cutting capacities includes 12-in. horizontal cut capacity, 5-1/2-in. vertical baseboard cut capacity against the fence and a 6-in. crown cut capacity nested against the fence (45 degree spring). Bevel lock lever and range selector are located upfront for quick, easy settings without having to reach around behind the saw. Tall sliding 4-1/4-in. fences for easy bevel set ups and increased crown and base molding capacity. Wide 47 degree left/47 degree right bevel capacity with detents at 0 degrees, 33.9 degrees and 45 degrees left/right for easy settings of most common bevel angles. Adjustable miter detents designed to be accurate and durable, and includes detents at 0 degrees, 15 degrees, 31.6 degrees, 22.5 degrees, 45 degrees and 60 degrees. Push button miter detent override provides easy to access thumb actuated control right up front for fine miter angle adjustment. Large easy to read uniform bevel and stainless steel miter scales in degrees, plus roof pitch angles for more convenient cut setup. Ergonomic ambidextrous trigger handle with soft grip provides comfort for all day use and a large form-fitting ergonomic handle. Milwaukee Powerstate brushless motor provides more corded cutting performance, power, more  run-time and longer life. Dual Bevel with 9 detents and easy access bevel lever. Top and side carrying handles for maximum portability. Detent override for easily setting miter locations outside of detents. The RedLink Plus Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection and productivity. Easy access to change blade. Durable RedLithium battery pack delivers more run-time, power and longer battery life with up to 400 cuts per charge. Maximum miter capacity 50/60. Includes: M18 Fuel Dual Bevel Sliding Compound Miter saw, (1) M18 RedLithium High Demand 9.0 battery pack, (1) M18 and M12 Rapid charger, (1) Blade Wrench, (1) Carbide Tipped Blade, (1) Clamp and (1) Dust bag. Adjustable stainless steel miter detent plate with 10-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. Single lever action double bevel design allows saw to easily bevel left and right 0-48 degree with positive stops at 0, 22.5, 33.9 and 45 degree in both directions permitting user to flip the saw and not the material. Back fence design delivers ability to cut 2 x 16" dimensional lumber at 90 degrees and 2 x 12" at 45 degrees. Precise miter system and machined base fence support deliver increased cutting accuracy. Innovative gearbox and belt-drive design for increased vertical cutting capacity. Miters 60 degrees to the left and 50 degrees to the right. Dual horizontal steel rails with clamping mechanism and linear ball bearings. Camlock miter handle with detent override. Compact and lightweight design for quick, easy transport and storage. For use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path.  STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15 amps, 3,800 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 16" horizontal capacity baseboard lying flat, 11-1/4" horizontal capacity crown molding lying flat,  2 x 14" (2 x 16" with back fence) 45-degree bevel cut capacity (dimensional lumber),  2 x 14" (2 x 16" with back fence) for 90-degree cross-cut capacity (dimensional lumber),  16" for 90-degree cross-cut capacity (max width), 2 x 12" max width for 45-degree miter-cut capacity (max height), 2 x 12" for 45-degree miter-cut capacity (max width). 53 lbs. tool weight. Stand Not Included.
Hitachi C10FSBP4 Double Bevel Sliding Compound Corded Miter Saw Hitachi C10FSHPS Double Bevel Sliding Compound Corded Miter Saw SAW MITRE 15A DUAL 12IN
SAW MITRE 15A DUAL 12IN
Our Price: $665.60
Positive angle stoppers for easy adjustment of teeth, turn table position for miter cutting (at the right and left of the 0-degree center setting, at 15,22.5, 31.6 and 45-degree settings). High sub fence. Legibly labeled angle scale and bevel scale. High dust collecting performance. Splinter guard, also serving for cut alignment. Electronically controlled soft start and constant speed for smooth, accurate cutting, fine surface finish and low noise operation. Poly V-belt and motor driving system for longer service life. STANDARD EQUIPMENT: 1 each: Vise Assembly, dust bag, 10mm box wrench, 255mm (10") TCT saw blade. SPECIFICATIONS: 10" diameter, 120V, 12 Amp, 1,400W max. output, 3,800 RPM, soft start and speed control. Max cutting capacities: 0-degree (right angle), miter cut 45-degree (left/right), miter right 57-degree, bevel cut 45-degree (left), bevel cut 45-degree (right), miter left/right 45-degree plus bevel left 45-degree, miter right 45-degree plus bevel right 45-degree. Miter cutting range: 0-45 degree left, 0-57 degree right. Bevel cutting range: 0-45 right and left. 20-3/4W x 41-1/2"L x 24-1/4"H. 43 lbs. tool weight. 12 AMP belt driven motor with soft start and overload protection. Adjustable laser guide for precise cutting. Soft Start feature reduces noise and recoil during start-up. Electronic speed control keeps RPMs constant as load varies. Linear ball bearing slide system for precision and durability. Left and right positive stops on miter gauge located at 0, 15, 22.5, 31.6, and 45 degrees. Dust collection system collects 100% more dust than previous models. STANDARD EQUIPMENT: saw, 10" TCT saw blade, dust bag, 10 mm box wrench, and vice assembly. SPECIFICATIONS: 12 AMP belt driven motor, pivoting fence, no-load speed of 3,800 RPM. This Dual-Bevel Glide Miter Saw features a smooth cutting motion, accurate performance and a space saving design of the Bosch exclusive Axial-Glide system. Pre-aligned Square Lock Fences help the saw maintain precision throughout its life. A soft-grip ambidextrous handle along with a combination dust chute and vacuum adaptor add to user comfort. The saw also offers a large cutting capacity, easy-to-read bevel and miter scales with detents at common angles, and easy access upfront controls. Integrated expanding base extensions: 60 percent more left to right material support than competitors. Large easy to read uniform bevel and stainless steel miter scales: 52 degrees left/60 degrees right miter capacity, 47 degrees left/47 degrees right bevel capacity with marked detents and roof pitch angles. Adjustable miter detents: detents at 0 degrees, 15 degrees, 31.6 degrees, 22.5 degrees, 45 degrees, 60 degrees right super accurate and durable design. Push button miter detent override; easy to access thumb actuated control right up front for fine miter angle adjustment. Bevel detents: 0, 33.9 degrees, 45 degrees left/right for accurate cuts.
SAW MITER SLIDING 12IN 120V SAW MITER COMPOUND 12IN BRSHLS SAW MITER DUAL-BVL WORM DRIVE
120 volt Max Double Bevel Sliding Compound Miter Saw with CutLine delivers capacity, accuracy, power, ease of use and the durability of a corded tool with the portability and convenience of a cordless tool. CutLine blade positioning system delivers accurate line of sight to be cut. Includes the 120 volt AC adaptor. (60 Volt Max Lithium Ion Batteries And Fast Charger Sold Separately). The 12" (305mm) 120V max compound miter saw delivers the power and cutting capacity that end users have come to expect from Dewalt corded miter saws with the portability and convenience of a cordless. Run time up to 289 cross cuts in baseboard along with the best in class vertical capacity against sliding fence. Tool height 26"; Tool length 32"; Tool weight 44 lbs. No load speed 3,800 rpm. Kit includes: (1) 12" (305mm) Compound miter saw, (1) Dual port fast charger, (1) blade, (1) 120V AC adapter, (2) 60V Max Lithium Ion batteries, (1) blade change wrench and (1) dust bag.
Milwaukee 6955-20 Double Bevel Sliding Compound Corded Miter Saw SAW SLIDNG MITER 12IN BRSHLS
The Miter Angle Digital Readout provides repeatable accuracy to 0.1 degree. Miter Angle Fine Adjust with Detent Override makes it simple to dial in precise miter angles. Dual Integral Jobsite Lights fully illuminate the work piece and cut line from either side of the blade. The powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor provides increased power for high performance cutting in hard lumber. Constant Power Technology with Soft Start maintains constant cutting speed under load and decreases start up head movement. The Integral Dust channel captures up to 75 percent of the dust and debris cut. SPECIFICATIONS: Amps:  15.0; No Load Speed:  3,200 RPM; Blade Diameter:  12"; Arbor Size:  5/8" or 1"; Miter Range:  55 degrees  Left to 60 degrees  Right; Bevel Range:  48 degrees  Left to 48 degrees  Right; Miter Stops:  Left-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 55 degrees; Right-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 60 degrees; Bevel Stops:  Left-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees  Right-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees. Tool Weight  65 lbs. INCLUDES: Carbide Tipped Blade; Dust Bag; Blade Wrench. This double bevel sliding compound miter saw offers flexible power options; corded for unlimited run time or cordless for portability powered by Dewalt brushless motor technology. Accuracy is delivered through adjustable miter scale with 11 positive stops and visibility bevel scale the CutLine blade positioning system. Up to 289 cross cuts in 3-1/4" base molding. Compact design weighs only 56 lbs. Includes: (1) DHS 790 Miter saw, (1) Dual port fast charger, (2) 60 volt Max Lithium Ion batteries, (1) blade wrench, (1) 12" blade, (1) DCA 120 volt Max corded power supply and (1) dust bag.
   
 
1