Home > HARDWARE > WINDOW & DOOR HARDWARE > BYPASS DOOR HARDWARE
Choose a sub category:
HARDWARE SETS BYPASS DOOR REPAIR PARTS

Bypass Door Hardware
Sort By:
1 2
Prime Line N 6567 Door Guide Prime Line N 6563 Door Guide Prime Line N-6706 Adjustable Bottom Pivot
N 6567 is a set of two white nylon floor guides for a single door that is any thickness. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers. N 6563 is a white nylon floor guide for 1-3/8 in THK doors. A universal design. At 1-1/8 in tall, it provides a taller than normal guide for most standard thickness closet doors. N 6706 is a bottom mount pivot used by many bi-fold door manufacturers. The 3/8 in Dia nylon base houses a 1/4 in pivot with a hex head nut for adjustment.
Prime Line N 6562 Floor Mount Door Guide Prime Line N-6893 Finger Pull Prime Line N-6846 Finger Pull
N 6562 is a three-piece adjustable floor guide. Made of white nylon, the guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in THK. Used by many closet door manufacturers. The guides extend 3/4 in from the floor. For taller guides see N 6760 or N 6761. These sliding panel door finger pulls are constructed of stamped steel and they come finished in a satin nickel plating. They feature a 5/16 in deep-recessed area and fit into 3/4 in Dia holes. These finger pulls are used on by-passing sliding Closet Doors, medicine cabinets and other furnishings and they are used by a variety of sliding door manufacturers. Plated steel, universal design fits a 3/4 in Dia hole.
Prime Line N-6698 Round Knob Pull Handle Prime Line N6508 Convex Edge Door Roller Assembly Prime Line N 6513 Round Edge Roller Assembly
This is a 2 in round door pull that comes with nails to hold it in a 2 in Dia hole in the closet door. It is plated brass and used on a variety of Closet Door manufacturer's doors. There are two pulls and four nails per package. Fits Cox wardrobe doors in top hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in THK by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws. This is a single wheel, top hung, side mounted adjustable roller bracket with a 1 in convex nylon roller that fits onto the back wardrobe door panel. The stamped steel adjustable bracket has a 3/4 in offset and fits onto a 3/4 to 1-3/8 in THK door. Primarily used on Cox door systems, it may also be found on a variety of other wardrobe door manufacturer's doors. For deeper offsets see Prime-Line parts N 6514 and N 6515.
Prime Line N-7206 Knob Pull Handle Prime Line N6509 Convex Edge Door Roller Assembly PULL CLOSET DOOR BRONZE 2IN
Held in place by two nails used by many wardrobe & door manufacturers. Includes two pull handles, four brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers. Fits Cox wardrobe doors in top hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in THK by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws. Plated steel, includes two brass nails for installation.
Prime Line N 6560 Adjustable Door Guide Prime Line N-6661 Adjustable Floor Mount Guide and Carpet Riser PART SLIDING DOOR TAN
N 6560 is a two-piece adjustable floor guide. Made of white nylon, the guides can be adjusted to accommodate doors 3/4 to 1-3/8 in THK by using the slots in the stamped steel floor base. Used by many closet door manufacturers. The guides extend 5/8 in from the floor. N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates can raise the guides from 1/8 to 5/8 in above the floor to accommodate the height of the carpet. Designed as an adjustable, guide for by-passing doors from 3/4 to 1-3/8 in THK. Keeps door properly aligned. Needs cardboard shim for proper spacing of 2 side sections. Includes screw.
Prime Line N-7203 Finger Pull Prime Line N 6516 Round Edge Roller Assembly National Hardware V796 Sliding Door Hanger
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers. Fits wardrobe doors in top hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in THK doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws. National Hardware Adjustable Sliding Door Hanger, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Bypass Door
National Hardware V797 Sliding Door Hanger Prime Line N-7209 Cross Finger Pull Prime Line N 6500 Round Edge Roller Assembly
National Hardware Adjustable Sliding Door Hanger, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Thick Doors Held in place by two nails used by many wardrobe & door manufacturers. Includes two pull handles, four brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers. Fits Acme wardrobe doors in top hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in THK doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
Prime Line N 6512 Round Edge Roller Assembly Prime Line N 6517 Round Edge Roller Assembly Prime Line N 6501 Round Edge Roller Assembly
This is a single wheel, top hung, side mounted adjustable roller bracket with a 1 in convex nylon roller that fits onto the front wardrobe door panel. The stamped steel adjustable bracket has a 1/4 in offset and fits onto a 3/4 to 1-3/8 in THK door. Primarily used on Cox door systems, it may also be found on a variety of other wardrobe door manufacturer's doors. Fits wardrobe doors in top hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in THK doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws. Fits Acme wardrobe doors in top hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in THK doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
Prime Line N6527 Convex Edge Tandem Roller Assembly HANGER DOOR SLIDING HANGER DOOR SLIDING
Restore smooth, reliable operation to your sliding closet doors with this top-mounted tandem roller assembly. Designed for use with Harvey and similar closet door systems, this center-mount roller features dual 3/4 in convex nylon wheels that provide balanced support and consistent glide. Ideal for doors between 3/4 in and 1-3/8 in THK, this assembly helps reduce sticking, misalignment and uneven movement for improved door performance. The rollers are housed in a durable stamped steel casing and mounted on a 5/16 in threaded steel rod, allowing for height adjustment and precise alignment during installation. This adjustable design ensures a proper fit and smooth track engagement, making it a great solution for repairs or replacements. The top-hung configuration threads into a compatible bracket, such as Prime-Line part N 6797, for secure installation. Mounting hardware is included and set-up requires only a standard Phillips head screwdriver. Built for durability and ease of use, this tandem roller assembly is a dependable choice for maintaining or upgrading closet door systems. Always verify dimensions and compatibility before purchasing. Nylon wheels require no lubrication. For 3/4 to 1-3/8 in THK doors. Cam-action dial permits fingertip adjustments in aligning door to jamb. Nylon wheels require no lubrication. For 3/4 to 1-3/8 in THK doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
Prime Line N 6531 Twin Pocket Roller Assembly National Hardware V771D By-Pass Door Hardware Set National Hardware V770D By-Pass Door Hardware Set
This tandem roller assembly is constructed from nylon. It features an adjustable top-mount design with round edge nylon wheels with a 1/2 in nut. It fits Acme and other similar styled doors that are 3/4 to 1-3/4 in THK. National Hardware By-Passing Door Hardware, Maximum Weight per Door: 60 lb, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 48 in L National Hardware By-Passing Door Hardware, Maximum Weight per Door: 60 lb, Door Thickness: 3/4 to 1-3/8 in, Nylon/Steel, Galvanized, Dimensions: 48 in L, Includes: 770 Rail, 192 Adjustable Bypassing Door Guide, 790/791 Dial Action Hangers and Screws
   
 
1 2
For any homeowner or contractor looking to update a home in Greater Atlanta, Smyrna or Norcross, GA, Ross Tool and Hardware has the materials you need. For a sleek and modern look, you may want to install bypass doors. We have an exclusive line of bypass door hardware, including bypass closet door hardware and cabinet bypass door hardware. Our bypass door handles come in a variety of shapes and colors so you can seamlessly incorporate them into your existing décor. Additionally, our bypass door tracks make installation a quick and easy process.

Whether you're looking for cap pulls, flush pulls, universal door guides, rollers, tracks or mounts, we have you covered. You can stop by our store or order your products online for a fast and convenient process. At Ross Tool and Hardware, we strive to be your one-stop shop for all of your bypass door hardware needs.