|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6567 is a set of two white nylon floor guides for a single door that is any thickness. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.
|
N 6563 is a white nylon floor guide for 1-3/8 in THK doors. A universal design. At 1-1/8 in tall, it provides a taller than normal guide for most standard thickness closet doors.
|
BP101P Bypass door floor guide. Screws into the floor to keep bypass doors straight during operation. Adjustable nylon fits doors from 3/4 to 1-3/8 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6706 is a bottom mount pivot used by many bi-fold door manufacturers. The 3/8 in Dia nylon base houses a 1/4 in pivot with a hex head nut for adjustment.
|
N 6562 is a three-piece adjustable floor guide. Made of white nylon, the guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in THK. Used by many closet door manufacturers. The guides extend 3/4 in from the floor. For taller guides see N 6760 or N 6761.
|
These sliding panel door finger pulls are constructed of stamped steel and they come finished in a satin nickel plating. They feature a 5/16 in deep-recessed area and fit into 3/4 in Dia holes. These finger pulls are used on by-passing sliding Closet Doors, medicine cabinets and other furnishings and they are used by a variety of sliding door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
This is a 2 in round door pull that comes with nails to hold it in a 2 in Dia hole in the closet door. It is plated brass and used on a variety of Closet Door manufacturer's doors. There are two pulls and four nails per package.
|
Fits Cox wardrobe doors in top hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in THK by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a single wheel, top hung, side mounted adjustable roller bracket with a 1 in convex nylon roller that fits onto the back wardrobe door panel. The stamped steel adjustable bracket has a 3/4 in offset and fits onto a 3/4 to 1-3/8 in THK door. Primarily used on Cox door systems, it may also be found on a variety of other wardrobe door manufacturer's doors. For deeper offsets see Prime-Line parts N 6514 and N 6515.
|
Held in place by two nails used by many wardrobe & door manufacturers. Includes two pull handles, four brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Fits Cox wardrobe doors in top hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in THK by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated steel, includes two brass nails for installation.
|
N 6560 is a two-piece adjustable floor guide. Made of white nylon, the guides can be adjusted to accommodate doors 3/4 to 1-3/8 in THK by using the slots in the stamped steel floor base. Used by many closet door manufacturers. The guides extend 5/8 in from the floor.
|
N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates can raise the guides from 1/8 to 5/8 in above the floor to accommodate the height of the carpet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed as an adjustable, guide for by-passing doors from 3/4 to 1-3/8 in THK. Keeps door properly aligned. Needs cardboard shim for proper spacing of 2 side sections. Includes screw.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Fits wardrobe doors in top hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in THK doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Adjustable Sliding Door Hanger, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Bypass Door
|
National Hardware Adjustable Sliding Door Hanger, 60 lb Weight, Plastic/Steel, Suitable for: 3/4 to 1-3/8 in Thick Doors
|
Held in place by two nails used by many wardrobe & door manufacturers. Includes two pull handles, four brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Acme wardrobe doors in top hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in THK doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
This is a single wheel, top hung, side mounted adjustable roller bracket with a 1 in convex nylon roller that fits onto the front wardrobe door panel. The stamped steel adjustable bracket has a 1/4 in offset and fits onto a 3/4 to 1-3/8 in THK door. Primarily used on Cox door systems, it may also be found on a variety of other wardrobe door manufacturer's doors.
|
Fits wardrobe doors in top hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon ball bearing wheel. For 3/4 to 1-3/8 in THK doors. Includes 2 #6 x 5/8 in and 1 #4 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Acme wardrobe doors in top hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in THK doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
Restore smooth, reliable operation to your sliding closet doors with this top-mounted tandem roller assembly. Designed for use with Harvey and similar closet door systems, this center-mount roller features dual 3/4 in convex nylon wheels that provide balanced support and consistent glide. Ideal for doors between 3/4 in and 1-3/8 in THK, this assembly helps reduce sticking, misalignment and uneven movement for improved door performance. The rollers are housed in a durable stamped steel casing and mounted on a 5/16 in threaded steel rod, allowing for height adjustment and precise alignment during installation. This adjustable design ensures a proper fit and smooth track engagement, making it a great solution for repairs or replacements. The top-hung configuration threads into a compatible bracket, such as Prime-Line part N 6797, for secure installation. Mounting hardware is included and set-up requires only a standard Phillips head screwdriver. Built for durability and ease of use, this tandem roller assembly is a dependable choice for maintaining or upgrading closet door systems. Always verify dimensions and compatibility before purchasing.
|
Nylon wheels require no lubrication. For 3/4 to 1-3/8 in THK doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nylon wheels require no lubrication. For 3/4 to 1-3/8 in THK doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
|
This tandem roller assembly is constructed from nylon. It features an adjustable top-mount design with round edge nylon wheels with a 1/2 in nut. It fits Acme and other similar styled doors that are 3/4 to 1-3/4 in THK.
|
PD119P 3-wheel hanger kit. 2 pack kit with ball bearing wheels for repairs of existing installation. Hardware for one door weighing 200 lb. Ball bearing wheels for smooth & quiet rolling.
|
|
|
