|
|
|
|
|
|
|
|
|
|
|
|
|
|
9/16 in to 24 fine thread flare end for space heaters. Bagged with flag tag.
|
Anderson Metals Space Heater Tube Nut, Nominal Size: 3/8 in, Flared Connection, 1000 psi, Temperature Rating: 73 deg F, Brass
|
Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. AGA design certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BrassCraft Flare Union, Nominal Size: 3/8 in, OD Tube Connection, Brass, Rough, 1-3/32 in L, 3/8 in Dia Outside, 600 to 3000 psi, Operating Temperature: -65 to 250 deg F, Suitable for: Fuel, Oil, Liquefied Petroleum and Natural Gas Lines
|
BrassCraft's steel female gas fitting adapts a gas connector nut to appliance gas inlet, gas ball valve outlet or to the gas supply pipe. These fittings are manufactured from solid bar stock for a seamless, durable design. The flared end of the fitting connects to the gas connector nut. The male end connects to the gas appliance inlet, gas ball valve or gas supply stub out. Fitting is used with 5/8 in OD (15/16-16 thread) gas connectors for appliances with larger BTU demands such as a 5 or 6 burner stove, furnace or boiler.
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9/16 in to 24 fine thread flare end for space heaters. Bagged with flag tag.
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
This fine thread flare female adaptor has 9/16-24 thread. Rough brass finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 1/4 in ID (3/8 in OD) corrugated tube. For gas clothes dryer connections. Tapped 1/8 in female pipe thread. Dimension of 5-1/2 in L x 3.8 in W x 0.6 in D.
|
9/16 in to 24 fine thread flare end for space heaters. Bagged with flag tag.
|
BrassCraft's steel female gas fitting connects a gas connector to an appliance gas inlet or gas supply pipe or gas ball valve. These fittings are manufactured from steel for a seamless, durable design. The flared end of the fitting connects to the gas connector nut. The male end connects to the gas appliance inlet, gas ball valve or gas supply stub out. Fitting is used with 5/8 in OD (15/16-16 thread) gas connectors for appliances with moderate BTU demands such as s a 5 or 6 burner stove, furnace or boiler.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite Gas Connector, Nominal Size: 5/8 x 1/2 in, Flare x FIP Connection, Steel, Zinc, 1-1/2 in L
|
BrassCraft's steel female gas fitting adapts a gas connector nut to appliance gas inlet, gas ball valve outlet or to the gas supply pipe. These fittings are manufactured from solid bar stock for a seamless, durable design. The flared end of the fitting connects to the gas connector nut. The male end connects to the gas appliance inlet, gas ball valve or gas supply stub out. Fitting is used with 5/8 in OD (15/16-16 thread) gas connectors for appliances with larger BTU demands such as a 5 or 6 burner stove, furnace or boiler.
|
Eastman Gas Adapter, Nominal Size: 1/2 in, Flare x FIP Connection, Steel, Zinc-Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Eastman Gas Adapter, Nominal Size: 5/8 x 1/2 in, Flare x MIP Connection
|
Eastman Gas Adapter, Nominal Size: 3/8 in, Flare x MIP Connection, Brass, Zinc-Plated
|
For corrugated tube. Recommended for gas range connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The flare reducing male adapter is highly dependable and an economical choice of fitting for refrigeration, compression, heating and air and other industrial markets. This all-brass fitting features a vibration-resistant construction. It resists mechanical pull-out and is designed for high-pressure service.
|
This fine thread flare female adaptor has 9/16-24 thread. Rough brass finish. BRASS CRAFT Half Union female adapter. 38 in OD TUBE x 12 in FIP. for use with F0-6 916-24.
|
Eastman Gas Adapter, Nominal Size: 1/2 in, Flare x MIP Connection, Steel, Zinc-Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 1/4 in ID (3/8 in OD) corrugated tube. Recommended for gas clothes dryer connections. Use with PlumbShop SL or RSL Series connectors.
|
For 1/4 in ID (3/8 in OD) corrugated tube. Recommended for gas clothes dryer connections. Use with SL or RSL Series connectors. Tapped 3/8 in female pipe thread.
|
Eastman Gas Adapter, Nominal Size: 5/8 x 3/4 in, Flare x MIP Connection
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For corrugated tube. Recommended for gas range connections.
|
15/16-16 thread for brass range connectors. UPC individually bagged.
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For 1/2 in ID (5/8 in OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2 in MIP end tapped 3/8 in FIP thread, 3/4 in MIP tapped 1/2 in FIP.
|
For 1/2 in ID (5/8 in OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2 in MIP end tapped 3/8 in FIP thread, 3/4 in MIP tapped 1/2 in FIP.
|
For 3/8 in ID (1/2 in OD) corrugated tube. Recommended for forced air heaters, gas ranges, furnaces and water heater connections. Use with PlumbShop SD or RSD Series connectors.
|
|
|
