Home > HARDWARE > GENERAL HARDWARE > CABINET & DRAWER HARDWARE > DRAWER SLIDES
Sort By:
1 2
Prime Line R 7133 Drawer Track Backplate Prime Line R 7131 Drawer Track Back Socket Prime Line R 7130 Drawer Track Guide Kit
Prime Line Drawer Track Backplate, Prime Line, Suitable For Use With: Hat-Section Style Track and Most Other Center Mount Tracks, 3/4 in Length X 2-3/4 in Width, Nylon, Steel, Plastic, Purple, For Self Adjusting Application Prime Line Drawer Track Back Socket, Suitable For Use With: Amerock Tri-Roller Drawer Slide Track, 1-13/16 in Width X 7/8 in Height, Plastic, White, Includes: (2) Track Supports and Installation Screws Prime Line Drawer Track Guide Kit, 1-1/4 in Width, Suitable For Use With: R-7125 Drawer Track Kit, Plastic, White/Purple, For Aligning Drawers and Allowing for Smoother Operation
Prime Line R 7082 Drawer Track Guide Kit Prime Line R 7152 Drawer Track Guide Kit Prime Line R 7154 Drawer Track Guide Kit
Prime Line Drawer Track Guide Kit, Prime Line, Suitable For Use With: 9/32 X 3/4 in Track, 25/32 in Width, Plastic, White/Red, Includes: (2) Guides, (4) Side Saddles and (2) Sets of Installation Fasteners, For Aligning Drawer Prime Line Drawer Track Guide Kit, Prime Line, Suitable For Use With: 9/32 X 1-1/8 in Track, 1-3/32 in Width, Plastic, Orange, Includes: (2) Guides, (4) Side Saddles to Accommodate (2) Drawers Prime Line Drawer Track Guide Kit, 2-1/2 in Width X 1-9/16 in Length, 1-5/16 in, Includes: (2) Guides and (4) Side Saddles, Suitable For Use With: 3/32 X 1-9/32 in Track, Plastic, White/Yellow, For Aligning Drawers and Allowing for Smoother Operation
Prime Line R 7147 Flat Stepped Drawer Guide Roller Assembly BRACKET RR MT F/MDL 84-8450 ZN Prime Line R 7148 Convex Drawer Track Roller
Prime Line Drawer Guide Roller Assembly, Flat Stepped, Prime Line, 1 in Outside Diameter, Plastic, White, Includes: (1) Left Hand Roller, (1) Right Hand Roller and (1) Set of Installation Fasteners Prime Line Drawer Track Roller, Convex, Prime Line, Suitable For Use With: Monorail Drawer Track Systems, 13/16 in Outer Diameter, Plastic, Includes: (2) Roller Assemblies, (2) Sets of Installation Screws
Prime Line R 7141 Drawer Track Roller Prime Line R 7132 Drawer Track Back Roller with Plastic Roller BRACKET RR MT F/MDL TT100 ZINC
Prime Line Drawer Track Roller, Convex, Prime Line, Suitable For Use With: Monorail Drawer Track Systems, 13/16 in Outside Diameter X 5/16 in WidthWheel X 3-1/2 in HeightBracket, Steel, Plastic, Includes: (2) Rollers with Mounting Screws, Roller Prime Line Drawer Track Back Roller, Suitable For Use With: Monorail Drawer Slide Systems, 27/32 in Diameter X 1-1/2 in Width X 2-7/8 in Height, Steel, Raw, Gray, Includes: (2) Roller Assemblies, (2) Sets of Installation Screw, With Plastic Roller, Convex Roller Edge, Used as Center Roller
BRACKET REAR MNT F/MDL 1805 ZN Prime Line R 7240 Right Hand/Left Hand Drawer Track Back Plate Knape & Vogt 1805HWH400 Euro Self-Close Drawer Slide
Prime Line Drawer Track Back Plate, Right Hand/Left Hand, Suitable For Use With: Side Mounted Drawer Track Systems, 2-9/16 in Width X 2-5/16 in Height, Nylon, Raw, White, 2-3/4 in Socket Depth Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1175P ZC 20 Light Duty Single Track Drawer Slide SLIDE DRWR 75LB 300MM WHT 12IN Knape & Vogt 1175P ZC 22-5/8 Light Duty Single Track Drawer Slide
Knape & Vogt Drawer Slide, Light Duty, Single Track, 20 in Length, 1 in Height, 50 lb Load Capacity, Under Mounting, Polyethylene Roller, Steel, Zinc Plated, Includes: Mounts with Staples or Screws, 3/4 in Extension Slide, For General Drawer Applications Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Knape & Vogt Drawer Slide, Light Duty, Single Track, 22-5/8 in Length, 1 in Height, 50 lb Load Capacity, Under Mounting, Polyethylene Roller, Zinc Plated, Includes: Mounts with Staples or Screws, 3/4 in Extension Slide, For General Drawer Applications
Knape & Vogt 1805HWH450 Euro Self-Close Drawer Slide Knape & Vogt 1805HWH500 Euro Self-Close Drawer Slide Prime Line R 7144 Drawer Track Repair Kit
Knape & Vogt Drawer Slide, Euro Self-Close, 18 in Length, 35.5 mm Height, 75 lb Load Capacity, Side Mounting, White, Epoxy Coated, 3/4 in Extension Slide, Used to Kitchen Cabinet, Commercial Millwork, Home Office and RTA Furniture Applications Knape & Vogt Drawer Slide, Euro Self-Close, 20 in Length, 35.5 mm Height, 75 lb Load Capacity, Side Mounting, White, Epoxy Coated, Includes: Screws, 3/4 in Extension Slide, Used to Kitchen Cabinet, Commercial Millwork, Home Office and RTA Furniture Applications Prime Line Drawer Track Repair Kit, 24 in Length, Suitable For Use With: Wooden Drawers, Steel, Used to Restore Smooth Operation to Track-Mounted Drawer
Knape & Vogt 1805HWH550 Euro Self-Close Drawer Slide Prime-Line R 7321 Drawer Track Guide and Glide Knape & Vogt 1300P ZC 12 Drawer Slide
Knape & Vogt Drawer Slide, Euro Self-Close, 22 in Length, 35.5 mm Height, 75 lb Load Capacity, Side Mounting, White, Epoxy Coated, Includes: Screws, 3/4 in Extension Slide, Used to Kitchen Cabinet, Commercial Millwork, Home Office and RTA Furniture Applications Prime-Line Drawer Track Guide and Glide, Plastic, Dark Brown, Includes: (2) Dark Brown, Plastic Track Case Guides and (2) Track Guides, (4) White Plastic Corner Glides, (8) Ring Shank Nails For Nailing In Corner Glides and (8) Phillips Drive, Pan Head Screws For Installation of Guides, Used on Furniture Drawer Systems, Dressers Knape & Vogt Drawer Slide, Medium Duty, 12 in Length, 3 in Height, 75 lb Load Capacity, Ball Bearing, Side Mounting, Steel, Zinc Plated, 3/4 in Extension Slide, For Kitchen Cabinet, Vanity, Desk and Store Fixture Applications
Knape & Vogt 1300P ZC 14 Drawer Slide Knape & Vogt 1300P ZC 18 Drawer Slide Knape & Vogt 1300P ZC 16 Drawer Slide
Knape & Vogt Drawer Slide, Medium Duty, 14 in Length, 3 in Height, 75 lb Load Capacity, Ball Bearing, Side Mounting, Steel, Zinc Plated, 3/4 in Extension Slide, For Kitchen Cabinet, Vanity, Desk and Store Fixture Applications Knape & Vogt Drawer Slide, Medium Duty, 18 in Length, 3 in Height, 75 lb Load Capacity, Ball Bearing, Side Mounting, Steel, Zinc Plated, 3/4 in Extension Slide, For Kitchen Cabinet, Vanity, Desk and Store Fixture Applications Knape & Vogt Drawer Slide, Medium Duty, 16 in Length, 3 in Height, 75 lb Load Capacity, Ball Bearing, Side Mounting, Steel, Zinc Plated, 3/4 in Extension Slide, For Kitchen Cabinet, Vanity, Desk and Store Fixture Applications
Knape & Vogt PBP10016 Precision Drawer Slide Knape & Vogt 1300P ZC 20 Drawer Slide Knape & Vogt 1300P ZC 22 Drawer Slide
Knape & Vogt Drawer Slide, Precision, 16 in Length, 1-1/8 in Height, 100 lb Load Capacity, Ball Bearing, Front Mounting, Includes: Screws, For Face Frame Applications Knape & Vogt Drawer Slide, Medium Duty, 20 in Length, 3 in Height, 75 lb Load Capacity, Ball Bearing, Side Mounting, Steel, Zinc Plated, 3/4 in Extension Slide, For Kitchen Cabinet, Vanity, Desk and Store Fixture Applications Knape & Vogt Drawer Slide, Medium Duty, 22 in Length, 3 in Height, 75 lb Load Capacity, Ball Bearing, Side Mounting, Steel, Zinc Plated, 3/4 in Extension Slide, For Kitchen Cabinet, Vanity, Desk and Store Fixture Applications
   
 
1 2