|
|
|
|
|
|
|
|
|
|
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty galvanized steel pulley with galvanized steel strap. Case hardened steel race with steel ball bearings. Factory lubricated and can be used at stationary or spring pulley positions. The width of the groove measures 5/16 in from inside wall to inside.
|
Used by most garage door manufacturers. Roller tube accepts a standard 7/16 in OD stem roller. Made of 14 ga galvanized steel, 3 in OAW. Includes four 1/4 in-20 x 1-7/8 in pancake head carriage bolts with nuts.
|
Factory lubricated, steel inner race. Fits 2 in standard J-track. Roller 1-7/8 in OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
Replaces most handles currently in use. Galvanized steel construction. Use vertically or horizontally. Includes two 1/4 in - 20 x 1-7/8 in pancake head carriage bolts with nuts.
|
High-impact plastic for good performance and quiet, trouble-free operation in all weather environments. Roller 1-7/8 in OD.
|
Used by most garage door manufacturers. Roller tube accepts a standard 7/16 in OD stem roller. Made of 14 ga galvanized steel, 3 in OAW. Includes four 1/4 in-20 x 1-7/8 in pancake head carriage bolts with nuts.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by most garage door manufacturers. Roller tube accepts a standard 7/16 in OD stem roller. Made of 14 ga galvanized steel, 3 in OAW. Includes four 1/4 in-20 x 1-7/8 in pancake head carriage bolts with nuts.
|
Short stem heavy-duty roller with steel inner race, 10 ball bearings. Includes 2 roller assemblies. Roller 1-7/8 in OD.
|
Factory lubricated, steel inner race. Fits 2 in standard J-track. Roller 1-7/8 in OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized carbon steel aircraft cables used on extension spring doors. 1/8 in replaces most wood doors, 3/32 in replaces most fiberglass and aluminum doors.
|
Works only from inside for extra protection as a night or vacation security lock. Fits most garage doors. Engages slot in vertical track. 7/8 in W x 1/8 in thick steel slide bolt with heavy-duty galvanized steel housing. Includes lock assembly and four 1/4 in-20 x 1-7/8 in pancake-head carriage bolts with nuts.
|
Zinc die-cast construction, keyed lock, 5/16 in square shaft, 4-5/8 in long, 1-1/2 in hole centers, replaces many garage door, camper and R.V locking handles. Screws attach to lock from the inside of door. Contains 1 locking handle, 2 keys.
|
|
|
|
|
|
|
|
|
|
|
|
|
5/16 in square shaft, 3 in L, replaces most garage door, camper and RV locking handles. Zinc die-cast construction. 1-1/2 in hole centers. Includes locking handle and 2 chrome-plated solid brass keys.
|
Prime-Line Door T Handle, Die-Cast Zinc, Zinc Plated, Includes: (1) Die Cast Outside Handle with 5/16 in Square X 3 in Length Shaft, (1) Die Cast Zinc Inside Handle with Set Screws
|
Plated die-cast handle and housing with 5/16 in square shaft, 3-1/8 in long, keyed lock with break-off spindle, works with GD-12138 slide lock.
|
|