|
|
|
|
|
|
|
|
|
|
|
|
|
|
Seals and protects wood surfaces and can be used to prepare surfaces for the application of a clear topcoat finish. May be applied to all types of bare or stained woods; also recommended as a sandable basecoat or sealer and promotes a smooth, fine finish; contains no stearates.
|
Universal sealer formulated to work under all clear wood finishes, Oil or water-based polyurethane, lacquers and shellac. Seals wood and is easy to sand. Low odor.
|
Penetrates wood pores deeply to seal and protect wood. Use as a pre-stain conditioner for all wood stains. Apply over new wood or over existing finishes. Compatible with all clear finishes. Tough, non-yellowing finish. Dries in minutes; easy to sand; recoat in less than 1 hour.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clear sealer formulated for application over bare wood. Seals wood grain. Designed to be sanded providing a smooth finish. Can be top coated with any Minwax oil or water-based polyurethane finish. Covers approximately 500 sq. ft. per gallon.
|
Clear sealer formulated for application over bare wood. Seals wood grain. Designed to be sanded providing a smooth finish. Can be top coated with any Minwax oil or water-based polyurethane finish. Covers approximately 500 sq. ft. per gallon.
|
Penetrates wood pores deeply to seal and protect wood. Use as a pre-stain conditioner for all wood stains. Apply over new wood or over existing finishes. Compatible with all clear finishes. Tough, non-yellowing finish. Dries in minutes; easy to sand; recoat in less than 1 hour.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Penetrates wood pores deeply to seal and protect wood. Use as a pre-stain conditioner for all wood stains. Compatible with all clear finishes, including oil- and water-based polyurethane, lacquer and shellac. Can be used on new wood or over existing finishes. Use in SCAQMD regulated areas. Tough, non-yellowing finish. Covers approximately 400-600 sq. ft. per gallon depending on application method and surface.
|
Seals and protects wood surfaces and can be used to prepare surfaces for the application of a clear topcoat finish. May be applied to all types of bare or stained woods; also recommended as a sandable basecoat or sealer and promotes a smooth, fine finish; contains no stearates.
|
|
|
